A POWERHOUSE WITH FIELD TESTED RELIABILITY
The 8.0 BTDAR is a small 3 cylinder work horse in the Westerbeke mobile line of diesel generators. Air tuning, a cast iron block, and 1800 rpm mean increased power, longevity and smooth, quiet operation. Each 8.0 BTDAR draws on field tested design experience gained supplying generators to the United States Navy, United States Coast Guard, and all the major U.S. Fire Apparatus Builders.
LIGHTWEIGHT, CONVENIENT & READY TO GO
66.7 amps and only 511 pounds, full instrumentation, optional one button start remote controls and glow plugs for all weather operation make the 8.0 BTDAR ready to go when you need it. And when you need to perform scheduled preventative maintenance easy single side serviceability makes the job a snap.
FULL TORQUE, FULL POWER PTO FOR POWER/RESCUE
The 8.0 BTDAR has the exclusive PTO to drive special options for power and rescue. Use the PTO to power high output DC alternators, or add an electric clutch and drive a compressor to bring air to the scene. Add the XRT® Combi package to the 8.0 BTDAR and you have a combination power rescue package for all your electrical and rescue tool needs.
AUXILIARY POWER SYSTEMS (APU)
Reduce idle times as much as 90%, reduce carbon emissions & regeneration times, while drastically reducing DPF maintenance & fuel costs. Our systems can be custom designed to fit your specific requirements, integrating HVAC units, heavy-duty alternators, and the XRT® Combi to run your recue tools.
CLEAN MACHINES
The 8.0 BTDAR is a clean machine. The diesel power plant meets all EPA and CARB emission regulations and the generator produces clean stable electricity from a 4 pole backend that is electronically governed and regulated.
GENERATOR MODEL
GENERATOR POWER
Amperage, 1 phase
Voltage regulator (type)
Voltage regulation, no load-full load +/-
Governor type
Frequency regulation, no load-full load
Cylinders
Cycles
Displacement - cu. In (liters)
Bore and stroke - in. (mm)
Cylinder head / block
Crankshaft
Fuel system
Fuel injection pump
Cooling system / Capacity qt. (liters)
Exhaust manifold
Battery charging alternator
Starting aid
Start
Dry weight - lbs. (kgs.)
Generator Dims. - LxWxH Inches
Generator Dims. - LxWxM Millimeters
8.0 BTDAR
8.0kW / 60Hz (@1800 rpm)
66.7
Transformer
5%
Built-in, mechanical (electronic opt.)
3.0 Hz (5%)
3
4
80.43 (1.318)
3.07 x 3.62 (78.0 x 92.0)
Cast Iron
Forged crankshaft/4 main bearings
Self-bleeding
Bosch type, solenoid shut-off
Radiator / 8.0 (7.6)
Dry (wet optional)
50 amp regulator
12V, sheathed type glow plug
Local or optional remote
511 (231.8)
34.6 x 20.0 x 26.1
879 x 508 x 663
Disclaimer: Technical information is provided on our website for your reference and convenience only. XRT Power Systems and Westerbeke Corp. recommends that your engine, generator and/or XRT hydraulic system is serviced and/or installed only by an authorized XRT Power Systems and/or Westerbeke distributor or dealer. This technical information is a reference guide only. XRT Power Systems and Westerbeke Corp. reserve the right to make changes and/or updates at any time and these changes may not be available on website.